- This forum has 7 topics, and was last updated by .
Viewing 7 topics - 1 through 7 (of 7 total)
-
- Topic
- Voices
- Last Post
-
-
Pipe Pressure Drop The Pipe Pressure Drop Tool calculates single, two-phase and compressible fluid flow losses through cylindrical conduits such as pipe. Standard pipe sizes are coded into PETS®. Non-standard sizes may also be used.
- 0
-
Fittings Equivalent Lengths The Equivalent Lengths Tool calculates equivalent straight length of pipe of various types of pipefittings. A series of fittings, including straight pipe, can be included so that the total equivalent length of a circuit or pipe run can be determined at once.
- 0
-
Orifice / Venturi The Orifice/Venturi Tool sizes new orifices or calculates the pressure drop or flow of existing orifices. This Tool also evaluates choked and critical flow orifices and venturi meters.
- 0
-
Pipe System Hydraulics The System Hydraulic Tool provides hydraulic analysis of a system of 8 pipes in series. A pump and control valve can be added to the system. Liquid, compressible vapor, or two-phase flow may be analyzed. This Tool combines the functions of pipe pressure drop, fittings equivalent lengths, pump horsepower, and pump NPSH.
- 0
-
Convert Pipe Diameter The Convert Pipe Diameter Tool converts equivalent lengths of various pipe diameters to a single pipe diameter equivalent length.
- 0
-
Control Valve The Control Valve Tool calculates the required Cv/Kv, pressure drop or flow through a gas or liquid control valve. Globe, butterfly, ball, angle or rotary eccentric valves may be selected. Valves can be evaluated with or without inlet and outlet reducers.
- 0
-
Weir Flow The Weir Flow Tool calculates flows through weirs including: Francis Formula, and ISO3846/ISO1438 calculations for open channel flows, broad and thin-plate weirs.
- 0
Viewing 7 topics - 1 through 7 (of 7 total)- You must be logged in to create new topics. Please return to the Forum "PETS Talk" page to login or register for an account.
-